Share:


Modification of natural oil sorbent for improvement of hydrophobicity

    Vaidotas Vaišis Affiliation
    ; Eglė Anužytė Affiliation
    ; Dainius Paliulis Affiliation
    ; Jolita Bradulienė Affiliation

Abstract

A sorbent made of natural materials (moss) was selected for the sorption of diesel from the surface of the water. The sorbent was modified to increase its hydrophobic–oleophilic characteristics. Typical natural organic sorbent from moss was selected and modified in three different ways: processed with hot water (80 °C and 100 °C), mercerized and coated with oil–water (10% and 50%). Water, diesel sorption capacity, and oil retention tests were performed. Tests showed that simple treatment with hot water and alkali can change surface properties and improve sorption capacity. Modification with hot water at 80 °C enhanced sorbents’ oil sorption capacity and showed the best results but meanwhile, this method readily increased hydrophilicity. This method of sorbent treatment could not be applied in cases where sorbents are used to clean oil spills from water surfaces. Meanwhile, better sorption results would be obtained in cases where cleaning operations take place on soil and other solid surfaces.

Keyword : sorption, oil spills cleanup, natural sorbent, sorbent modification methods, hydrophobicity

How to Cite
Vaišis, V., Anužytė, E., Paliulis, D., & Bradulienė, J. (2022). Modification of natural oil sorbent for improvement of hydrophobicity. Journal of Environmental Engineering and Landscape Management, 30(1), 226-233. https://doi.org/10.3846/jeelm.2022.16958
Published in Issue
May 16, 2022
Abstract Views
415
PDF Downloads
346
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Abdullah, M. A., Rahmah A. U., & Man, Z. (2010). Physicochemical and sorption characteristics of Malaysian Ceiba pentandra (L.) Gaertn. as natural oil sorbent. Journal of Hazardous Materials, 177(1–3), 683–691. https://doi.org/10.1016/j.jhazmat.2009.12.085

Amer, A. A., El-Maghraby, A., Malash, G. F., & Taha, N. A. (2007). Extensive characterization of raw barley straw and study the effect of steam pretreatment. Journal of Applied Sciences Research, 3(11), 1336–1342.

Angelova, D., Uzunov, I., Uzunova, S., Gigova, A., & Minchev, L. (2011). Kinetics of oil and oil products adsorption by carbonized rice husks. Chemical Engineering Journal, 172(1), 306–311. https://doi.org/10.1016/j.cej.2011.05.114

Annunciado, T. R., Sydenstricker, T. H. D., & Amico, S. C. (2005). Experimental investigation of various vegetable fibers as sorbent materials for oil spills. Marine Pollution Bulletin, 50(11), 1340–1346. https://doi.org/10.1016/j.marpolbul.2005.04.043

Aqsha, A., Tijani, M. M., & Mahinpey, N. (2017). Catalytic pyrolysis of straw biomasses (wheat, flax, oat and barley) and the comparison of their product yields. Journal of Analytical and Applied Pyrolysis, 125, 201–208. https://doi.org/10.1016/j.jaap.2017.03.022

ASTM International. (2012). Standard test method for sorbent performance of adsorbents (ASTM F726-12). https://standards.globalspec.com/std/3846228/astm-f726-12

Atta, A. M., Brostow, W., Lobland, H. E. H., Hasan, A. R. M., & Perez, J. M. (2013). Porous polymer oil sorbents based on PET fibers with crosslinked copolymer coatings. RSC Advances, 3(48), 25849–25857. https://doi.org/10.1039/c3ra44759f

Avila, A. F., Munhoz, V. C., Oliveira, A., Santos, M. C. G., Lacerda, G. R. B. S., & Gonçalves, C. P. (2014). Nano–based systems for oil spills control and cleanup. Journal of Hazardous Materials, 272, 20–27. https://doi.org/10.1016/j.jhazmat.2014.02.038

Aydin, G. O., & Sonmez, H. B. (2015). Hydrophobic poly (alkoxysilane) organogels as sorbent material for oil spill cleanup. Marine Pollution Bulletin, 96(1–2), 155–164. https://doi.org/10.1016/j.marpolbul.2015.05.033

Badawi, A. F., Cavalieri, E. L., & Rogan, E. G. (2000). Effect of chlorinated hydrocarbons on expression of cytochrome P450 1A1, 1A2 and B1 and 2– and 4–hydroxylation of 17β–estradiol in female Sprague–Dawley rats. Carcinogenesis, 21(8), 1593–1599. https://doi.org/10.1093/carcin/21.5.593

Baiseitov, D. A., Tulepov, M. I., Sassykova, L. R., Gabdrashova, S. E., Gul’dana, E., Zhumabai, D. A., Kudaibergenov, K. K., & Mansurov, Z. A. (2015). The sorbents for collection of oil and petroleum of the phytogenesis. International Journal of Chemical Sciences, 13(2), 1027–1033.

Barry, E., Anil, U. M., Joseph, A. L., Jeffrey, W. E., & Seth, B. D. (2017). Advanced oil sorbents using sequential infiltration synthesis. Journal of Materials Chemistry A, 5(6), 2929–2935. https://doi.org/10.1039/C6TA09014A

Bold, H. C. (1967). Morphology of plants. Harper and Row.

Dankovich, T. A., & Hsieh, Y. L. (2007). Surface modification of cellulose with plant triglycerides for hydrophobicity. Cellulose, 14(5), 469–480. https://doi.org/10.1007/s10570-007-9132-1

Galblaub, O. A., Shaykhiev, I. G., Stepanova, S. V., & Timirbaeva, G. R. (2016). Oil spill cleanup of water surface by plant–based sorbents: Russian practices. Process Safety and Environmental Protection, 101, 88–92. https://doi.org/10.1016/j.psep.2015.11.002

Gupta, S., & Nyan-Hwa, T. (2016). Carbon materials as oil sorbents: a review on the synthesis and performance. Journal of Materials Chemistry A, 4(5), 1550–1565. https://doi.org/10.1039/C5TA08321D

Hasanzadeh, O. (1993). Collecting oil spill with natural sorbents from the sea surface [Conference presentation]. The First National Conference of New Technologies in Chemical and Petrochemical.

Hokkanen, S., Bhatnagar, A., & Sillanpää, M. (2016). A review on modification methods to cellulose-based adsorbents to improve adsorption capacity. Water Research, 91, 156–173. https://doi.org/10.1016/j.watres.2016.01.008

Juteau, P., Bisaillon, J., Lépine, F., Ratheau, V., Beaudet, R., & Villemur, R. (2003). Improving the biotreatment of hydrocarbons–contaminated soils addition of activated sludge taken from the wastewater treatment facilities of an oil refinery. Biodegradation, 14(1), 31–40. https://doi.org/10.1023/A:1023555616462

Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012). Chemical treatments on plant–based natural fibre reinforced polymer composites: An overview. Composites Part B: Engineering, 43(7), 2883–2892. https://doi.org/10.1016/j.compositesb.2012.04.053

Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013). Surface modification of plant fibers using environment friendly methods for their application in polymer composites, textile industry and antimicrobial activities: A review. Journal of Environmental Chemical Engineering, 1(3), 97–112. https://doi.org/10.1016/j.jece.2013.04.009

Li, D., Zhu, F. Z., Li, J. Y., Na, P., & Wang, N. (2012). Preparation and characterization of cellulose fibers from corn straw as natural oil sorbents. Industrial & Engineering Chemistry Research, 52(1), 516–524. https://doi.org/10.1021/ie302288k

Li, H., Wu, W., Bubakir, M. M., Chen, H., Zhong, X., Liu, Z., Ding, Y., & Yang, W. (2014). Polypropylene fibers fabricated via a needleless melt‐electrospinning device for marine oil‐spill cleanup. Journal of Applied Polymer Science, 131(7), 1–9. https://doi.org/10.1002/app.40080

Lin, J., Shang, Y., Ding, B., Yang, J., Yu, J., & Al-Deyab, S. S. (2012). Nanoporous polystyrene fibers for oil spill cleanup. Marine Pollution Bulletin, 64(2), 347–352. https://doi.org/10.1016/j.marpolbul.2011.11.002

Liu, Y., Huang, G., Gao, C., Zhang, L., Chen, M., Xu, X., Gao, J., Pan, C., Yang, N., & Liu, Y. (2015). Biodegradable polylactic acid porous monoliths as effective oil sorbents. Composites Science and Technology, 118, 9–15. https://doi.org/10.1016/j.compscitech.2015.08.005

Morent, N. D., Geyter, J., Verschuren, K. D., Clerck, P., & Kiekens, C. (2008). Non thermal plasma treatment of textiles. Surface and Coatings Technology, 202(14), 3427–3449. https://doi.org/10.1016/j.surfcoat.2007.12.027

Panagos, P., Hiederer, R., Van Liedekerke, M., & Bampa, F. (2013). Estimating soil organic carbon in Europe based on data collected through and European network. Ecological Indicators, 24, 439–450. https://doi.org/10.1016/j.ecolind.2012.07.020

Rengasamy, R. S., Das, D., & Karan, C. P. (2011). Study of oil sorption behavior of filled and structured fiber assemblies made from polypropylene, kapok and milkweed fibers. Journal of Hazardous Materials, 186(1), 526–532. https://doi.org/10.1016/j.jhazmat.2010.11.031

Wahi, R., Chuah, L. A., Choong, T. S. Y., Ngaini, Z., & Nou­rouzi, M. M. (2013). Oil removal from aqueous state by natural fibrous sorbent: An overview. Separation and Purification Technology, 113, 51–63. https://doi.org/10.1016/j.seppur.2013.04.015

Wang, J., Zheng, Y., & Wang, A. (2013). Coated kapok fiber for removal of spilled oil. Marine Pollution Bulletin, 69(1–2), 91–96. https://doi.org/10.1016/j.marpolbul.2013.01.007

Wang, J., Zheng, Y., & Wang, A. (2012). Effect of kapok fiber treated with various solvents on oil absorbency. Industrial Crops and Products, 40, 178–184. https://doi.org/10.1016/j.indcrop.2012.03.002

Weyenberg, I. V., Ruong, T. C., Vangrimde, B., & Verpoest, I. (2006). Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment. Composites Part A Applied Science and Manufacturing, 37(9), 1368–1379. https://doi.org/10.1016/j.compositesa.2005.08.016

Wong, C., McGowan, T., Bajwa, S. G., & Bajwa, D. S. (2016). Impact of fiber treatment on the oil absorption characteristics of plant fibers. Bioresources, 11(3), 6452–6463. https://doi.org/10.15376/biores.11.3.6452-6463

Wu, D., Fang, L., Qin, Y., Wu, W., Mao, C., & Zhu, H. (2014). Oil sorbents with high sorption capacity, oil/water selectivity and reusability for oil spill cleanup. Marine Pollution Bulletin, 84(1–2), 263–267. https://doi.org/10.1016/j.marpolbul.2014.05.005

Yang, S., He, W. T., Fu, Y., Zhanga, Y., Yuana, T. Q., & Suna, R. C. (2017). A bio–based coating onto the surface Populus fiber for oil spillage cleanup applications. Industrial Crops and Products, 98, 38–45. https://doi.org/10.1016/j.indcrop.2017.01.031