Share:


Removal of tetracycline from aqueous solutions using nanoscale zero valent iron and functional pumice modified nanoscale zero valent iron

    Ulker Asli Guler Affiliation

Abstract

Nanoscale zero valent iron (nZVI) and functional pumice modified nanoscale zero valent iron (P-nZVI) were successfully synthesized and used for the removal of tetracycline (TC). These materials were characterized by SEM, TEM, XRD, FTIR, BET. Different factors such as the mass ratio, dosage of adsorbent, ph, initial TC concentration and temperature were investigated. Based on these results; a possible removal mechanism was proposed including TC adsorption and TC reduction via oxidation of Fe0 to Fe3+. In addition, isotherm and thermodynamic parameters were applied to the equilibrium data. The maximum adsorption capacity of TC by nZVI and P-nZVI was 105.46 mg/g and 115.13 mg/g, respectively. Adsorption and reduction kinetics were examined for the TC removal process. The pseudo-second-order model and pseudo-first-order model was observed for adsorption and reduction process, respectively. Finally, more than 90% of TC from aqueous solutions was removed by nzvi and P-nZVI.


First published online: 28 Nov 2016

Keyword : tetracyline, antibiotic, characterization, pumice, nanoscale zero valent iron, removal, batch

How to Cite
Guler, U. A. (2017). Removal of tetracycline from aqueous solutions using nanoscale zero valent iron and functional pumice modified nanoscale zero valent iron. Journal of Environmental Engineering and Landscape Management, 25(3), 223-233. https://doi.org/10.3846/16486897.2016.1210156
Published in Issue
Nov 28, 2017
Abstract Views
946
PDF Downloads
674
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.