Share:


Research of materials properties for 3D printing of orthoses

Abstract

In this paper examines the possibilities of applying 3D printing in the manufacture of orthoses. Features of 3D printing of biocompatible materials are analyzed. In this work, mechanical bending tests of three printed samples were performed. Based on test results, PETG material is selected for 3D modeling and printing. Technological properties of 3D printing were summarized. Modeling and printing of the orthoses prototype, compared to traditional methods, takes less time, and uses lower material costs, does not require much physical effort, is well suited to the patient’s body anatomy, and has a variety of design options.


Article in Lithuanian.


Medžiagų, skirtų ortopedinių įtvarų 3D spaudai, savybių tyrimas


Santrauka


Straipsnyje nagrinėjamos 3D spaudos taikymo ortopedinių įtvarų gamyboje galimybės. Nagrinėjami biologiškai suderinamų medžiagų 3D spaudos ypatumai. Darbe atlikti trijų atspausdintų bandinių mechaninio lenkimo bandymai. Remiantis bandymų rezultatais, 3D modeliavimui bei spausdinimui parenkama PETG medžiaga. Pateikiama spausdinimo technologinių parametrų suvestinė. Įtvaro prototipo modeliavimas bei spausdinimas, lyginant su tradiciniu būdu gaminamais įtvarais, užtrunka mažiau laiko, sunaudojami mažesni medžiagų kaštai, nereikalauja daug fizinių pastangų, puikiai atitinka paciento kūno anatomiją, turi įvairaus dizaino galimybę.


Reikšminiai žodžiai: ortopedinis įtvaras, mechaninės savybės, 3D modeliavimas, 3D spauda.

Keyword : orthoses, mechanical properties, 3D modelling, 3D printing

How to Cite
Jasiūnaitė, Živilė M., Šešok, A., Stonkus, R., & Šešok, N. (2021). Research of materials properties for 3D printing of orthoses. Mokslas – Lietuvos Ateitis / Science – Future of Lithuania, 13. https://doi.org/10.3846/mla.2021.14168
Published in Issue
Mar 9, 2021
Abstract Views
541
PDF Downloads
540
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Adeleke, W. (2018). 3D printing. https://www.researchgate.net/publication/324680847_3D_printing

GrabCad. (n.d.). Scanned human foot and leg. https://grabcad.com/

Hindle, C. (n.d.). Polypropilene (PP). British Plastics Federation. https://www.bpf.co.uk/Plastipedia/Polymers/PP.aspx

International Organization for Standardization. (2010). Plastics – Determination of flexural properties (ISO 178:2010). https://www.iso.org/standard/45091.html

Jin, Y., He, Y., & Shih, A. (2016). Process planning for the fuse deposition modeling of ankle-foot-othoses. Procedia CIRP, 42, 760–765. https://doi.org/10.1016/j.procir.2016.02.315

Krivoniak, A., & Sirinterlikci, A. (2017). 3D printed custom orthotic device development: a student-driven project [Conference presentation]. 2017 ASEE Annual Conference & Exposition, Columbus, Ohio. https://doi.org/10.18260/1-2--27436

Muñoz, S. (2018). The new generation of AFOS. The O&P EDGE. https://opedge.com/Articles/ViewArticle/2018-11-01/the-new-generation-of-afos

Proteor orthopaedics. (2016). PETG. http://orthopaedics.proteor.com/family,1317-petg.php

Ross, R. S., Greig, R. J., & Convery, P. (1999). Comparison of bending stiffness of six different colours of copolymer polypropylene. Prosthetics and Orthotics International, 23(1), 63–71. https://doi.org/10.3109/03093649909071613

Smit, E. (2014). Thermoplastic materials used in Orthotics and Prostetics. https://prezi.com/yr0h-jvqt_nn/thermoplasticmaterials-used-in-orthotics-and-prostetics/

Šešok, A. (2012a). Medžiagos medicinoje: mokomoji knyga. Technika. https://doi.org/10.3846/1380-S

Šešok, A. (2012b). Ortopedinės technikos projektavimas ir gamyba. Technika. https://doi.org/10.3846/1376-s

Wach, A., McGrady, L., Wang, M., & Silver-Thorn, B. (2018). Assessment of mechanical characteristics of ankle-foot orthoses. Journal of Biomechanical Engineering, 140(7), 071007. https://doi.org/10.1115/1.4039816

Wan, Y. Z., Zak, G., Naumann, S., Redekop, S., Slywynska, I., & Jiang, Y. (2007). Study of 2.5-D glass-fabric-reinforced lightcurable resin composites for orthotic applications. Composites Science and Technology, 67(13), 2739–2746. https://doi.org/10.1016/j.compscitech.2007.02.010