Experimental research of linear encoder
Abstract
Knowledge of the ongoing processes in the linear encoder and application of new technologies allows to solve problems and adapt to increasingly tightening requirements. In the paper, the dynamical characteristics of the linear encoder scanning-head are examined, and the special experimental equipment for the investigation of the mechanical vibration influence, while the head is driven at certain speeds, is presented.
Article in Lithuanian.
Eksperimentiniai linijinio keitiklio sistemos tyrimai
Santrauka
Linijinių poslinkių matavimo keitikliuose vykstančių procesų išmanymas ir naujųjų technologijų taikymas leidžia spręsti kylančias problemas ir prisiderinti prie vis griežtėjančių reikalavimų. Darbe išnagrinėtos linijinio keitiklio sistemos vienos pagrindinės dalies – matavimo galvutės – dinaminės charakteristikos. Šiame darbe atlikti precizinės linijinio keitiklio sistemos eksperimentiniai tyrimai. Darbe parodytas linijinio keitiklio sistemos eksperimentinis stendas, kuris skirtas virpesių poveikiui tirti esant skirtingiems judėjimo greičiams.
Reikšminiai žodžiai: linijinis keitiklis, dinaminės charakteristikos, dinaminis režimas.
Keyword : linear encoder, dynamic characteristics, dynamic mode
How to Cite
Gurauskis, D., Kilikevičius, A., Fursenko, A., & Samy, M. (2018). Experimental research of linear encoder. Mokslas – Lietuvos Ateitis / Science – Future of Lithuania, 9(6), 593-596. https://doi.org/10.3846/mla.2017.1091
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Jurevičius, M.; Skeivalas, J.; Kilikevičius, A.; Turla, V. 2017. Vibrational analysis of length comparator, Measurement 103: 10–17. https://doi.org/10.1016/j.measurement.2017.02.010
Kasparaitis, A.; Vekteris, V.; Kilikevichius, A. 2006. A vibration source in comparator, in Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2006, Ancona, Italy, Proceedings of SPIE 6345, 6345O-1.
Kilikevičius, A.; Jurevičius, M.; Berba, M. 2010. Research of dynamics of a vibration isolation platform, Journal of Vibroengineering 12(3): 361–367.
Kilikevičius, A.; Jurevičius, M.; Skeivalas, J.; Kilikevičienė, K.; Turla, V. 2016a. Vibrational analysis of angle measurement comparator, Signal, Image and Video Processing 10(7): 1287–1294. https://doi.org/10.1007/s11760–016–0956–8
Kilikevičius, A.; Kasparaitis, A.; Lazdinas, R.; Kilikevičienė, K. 2016b. Kinematic and dynamic errors during the measurement of linear displacements using the angle transducers, Mechanika 22(3): 212–216. https://doi.org/10.5755/j01.mech.22.3.14180
Kilikevičius, A.; Kasparaitis, A. 2017. Dynamic research of multi-body mechanical systems of angle measurement, International Journal of Precision Engineering and Manufacturing 18(8): 1065–1073. https://doi.org/10.1007/s12541–017–0125–1
Šiaudinytė, L.; Kilikevičius, A.; Sabaitis, D.; Grattan, K. T. V. 2016. Modal analysis and experimental research into improved centering – leveling devices, Measurement 88: 9–17. https://doi.org/10.1016/j.measurement.2016.01.044
Kasparaitis, A.; Vekteris, V.; Kilikevichius, A. 2006. A vibration source in comparator, in Seventh International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 2006, Ancona, Italy, Proceedings of SPIE 6345, 6345O-1.
Kilikevičius, A.; Jurevičius, M.; Berba, M. 2010. Research of dynamics of a vibration isolation platform, Journal of Vibroengineering 12(3): 361–367.
Kilikevičius, A.; Jurevičius, M.; Skeivalas, J.; Kilikevičienė, K.; Turla, V. 2016a. Vibrational analysis of angle measurement comparator, Signal, Image and Video Processing 10(7): 1287–1294. https://doi.org/10.1007/s11760–016–0956–8
Kilikevičius, A.; Kasparaitis, A.; Lazdinas, R.; Kilikevičienė, K. 2016b. Kinematic and dynamic errors during the measurement of linear displacements using the angle transducers, Mechanika 22(3): 212–216. https://doi.org/10.5755/j01.mech.22.3.14180
Kilikevičius, A.; Kasparaitis, A. 2017. Dynamic research of multi-body mechanical systems of angle measurement, International Journal of Precision Engineering and Manufacturing 18(8): 1065–1073. https://doi.org/10.1007/s12541–017–0125–1
Šiaudinytė, L.; Kilikevičius, A.; Sabaitis, D.; Grattan, K. T. V. 2016. Modal analysis and experimental research into improved centering – leveling devices, Measurement 88: 9–17. https://doi.org/10.1016/j.measurement.2016.01.044