Vol 2 No 4 (2010): Mechanics, material science, industrial engineering and management
Published: 2010-08-31
Article
Investigation into the quality of thermally treated package lamination
Abstract 427 | PDF Downloads 307 | DOI https://doi.org/10.3846/mla.2010.058
Page 5-9
Investigation into delamination
Abstract 426 | PDF Downloads 285 | DOI https://doi.org/10.3846/mla.2010.059
Page 10-12
Research on transfering the dynamic process by the spring
Abstract 463 | PDF Downloads 274 | DOI https://doi.org/10.3846/mla.2010.060
Page 13-17
The influence of formulating a damping solution on dot gain
Abstract 448 | PDF Downloads 274 | DOI https://doi.org/10.3846/mla.2010.061
Page 18-23
Adhesive analysis of painted coatings
Abstract 466 | PDF Downloads 704 | DOI https://doi.org/10.3846/mla.2010.062
Page 24-27
The methodology for calculating book backbones
Abstract 436 | PDF Downloads 487 | DOI https://doi.org/10.3846/mla.2010.063
Page 28-30
Research on the influence of orthopaedic inserts on pressure distribution in the foot
Abstract 469 | PDF Downloads 533 | DOI https://doi.org/10.3846/mla.2010.064
Page 31-34
Research of human postural balance parameters
Abstract 450 | PDF Downloads 716 | DOI https://doi.org/10.3846/mla.2010.065
Page 35-38
About the possibility of using ultrasound in thermal spray technologies
Abstract 408 | PDF Downloads 322 | DOI https://doi.org/10.3846/mla.2010.066
Page 39-41
Research on the efficiency of side exhausters
Abstract 422 | PDF Downloads 315 | DOI https://doi.org/10.3846/mla.2010.067
Page 42-45
Review of devices for measuring angles and prospects for development
Abstract 421 | PDF Downloads 416 | DOI https://doi.org/10.3846/mla.2010.068
Page 46-49
Research on the efficiency of drinking water aeration systems
Abstract 481 | PDF Downloads 287 | DOI https://doi.org/10.3846/mla.2010.069
Page 50-52
The impact of the welded joints made of X8CrNiTi18–10 stainless steel on the reliability estimation of pipes
Abstract 481 | PDF Downloads 311 | DOI https://doi.org/10.3846/mla.2010.070
Page 53-58
Sorting plastic waste in hydrocyclone
Abstract 559 | PDF Downloads 345 | DOI https://doi.org/10.3846/mla.2010.071
Page 59-61
Protection of intellectual property in pharmaceutical industry
Abstract 510 | PDF Downloads 330 | DOI https://doi.org/10.3846/mla.2010.072
Page 62-64
The research of influence of vibromechanical treatment on ni coatings PT-19N-01 adhesion
Abstract 445 | PDF Downloads 245 | DOI https://doi.org/10.3846/mla.2010.073
Page 65-68
Methods of forecasting in foreign exchange market
Abstract 534 | PDF Downloads 481 | DOI https://doi.org/10.3846/mla.2010.074
Page 69-72
Research on the mechanical properties of the weld seams of constructional steel using vibration energy method during welding
Abstract 494 | PDF Downloads 581 | DOI https://doi.org/10.3846/mla.2010.075
Page 73-76
Methodical aspects of creativity stimulation for the purposes of innovation development
Abstract 485 | PDF Downloads 945 | DOI https://doi.org/10.3846/mla.2010.076
Page 77-82
Research on cutting the plasma of aluminium alloys
Abstract 490 | PDF Downloads 354 | DOI https://doi.org/10.3846/mla.2010.077
Page 83-87
The influence of feed rate on surface roughness of TIC–WC carbide and Al2O3 ceramics SAWN-OFF with inner edge of diamond disc
Abstract 462 | PDF Downloads 277 | DOI https://doi.org/10.3846/mla.2010.078
Page 88-90
Research of defects in spur gear
Abstract 409 | PDF Downloads 372 | DOI https://doi.org/10.3846/mla.2010.079
Page 91-94
Research on the time-dependent adaptation of arterial blood pressure considering load value
Abstract 413 | PDF Downloads 334 | DOI https://doi.org/10.3846/mla.2010.080
Page 95-97
A case study on improving the process of decision making in industrial companies
Abstract 511 | PDF Downloads 532 | DOI https://doi.org/10.3846/mla.2010.081
Page 98-102
Typical lexical and syntactical mistakes in technical treatises
Abstract 427 | PDF Downloads 6267 | DOI https://doi.org/10.3846/mla.2010.082
Page 103-106